성화퓨렌텍

CONTROLLER FOR GAS DETECTOR

Home > Products > CONTROLLER FOR GAS DETECTOR

차량정보 표
Model No.	MULTI CHANNEL CONTROLLER SHT-9000MU.DU Rack Type
Category	CONTROLLER FOR GAS DETECTOR

Description

Compact design.
From a single channel to multi-channel design.
Designed with an SMPS channel for universal voltage and frequency use, both domestically and internationally.
AI-based gas detection controller with microprocessor for detecting gas leakage and malfunctions.
4 Digit FND Digital & Bar graphic 40 LED display.
Setting of Zero point, Span, Calibration on the Front without volume.
Ease of system setup by RS-485 Modbus serial communication.
3 Stage alarm & Equipped with an alarm threshold setting function and an alarm delay function.
4-20mA, Relay contact, 24VDC signal output.
A multi-channel gas receiver connected to an installed gas detector on-site, enabling real-time measurement of ambient gas concentration, displaying the concentration level, and triggering an alarm at a preset threshold in case of a hazardous condition.

Model No

SHT-9000MU.DU

Measuring gas

LNG, LPG, Flammable GAS
Toxic GAS, O2/Oxygen

Measuring range

0-100% (LEL) - Flammable gas
0-PPM - Toxic gas (Refer to the range for toxic gases)
0-25% (X) - Oxygen

Measuring display

4 Digit FND Digital & Bar graph
Three stage alarm (1st, 2nd, 3rd), Customizable alert alarm points and concentration range values

Input signal

4-20mA (2 wire or 3 wire), RS-485

Output signal

4-20mA, Relay contact (3 stage) (Common and individual)

Alarm sound

More than 90dB

Operating power

24VDC

Consumption electric power

1.1CH - 70W (Alarm 90W)

Mounting type

Rack (Panel insert) type

Dimension

3CH (218(W) x 132(H) x 39(D))
9CH (196(W) x 462(H) x 132(D))

Operating temp/humi

-20°C~+40°C/85% RH

Weight

3CH - 1.70 Kgs
9CH - 3.85 Kgs